• Custom frequencies, programmed from 1.000000 to 26.000000 MHz
• 60 µA at 3.072 MHz, up to 90% lower than quartz XOs 
• 1.5 x 0.8 mm package, ideal for mobile and IoT devices
• Available with short lead times

• Snap-on endcaps that are removable & serviceable in the field
• Intermateable with existing industry solutions 
• 2 to 12-way layouts 
• Size 16 (13A) contacts

With key features like high-performance 2.4 GHz RF, low current consumption, an AI/ML hardware accelerator, and Secure Vault™, IoT device makers can create smart, robust, and energy-efficient products that are secure from remote and local cyber-attacks.

The AMF adaptors comply with medical, home-healthcare & ITE approvals along with level VI standards, high active mode efficiency & low no load consumption. Designed to operate down to 80VAC to allow for transmission line loss in remote non-hospital locations, whilst maintaining a reliable DC output.

These solutions combine ADI's precision amplifiers, voltage references, ADCs, DACs, circuit protection and isolation products, allowing system designers to build with confidence a solution that optimizes for their precision and speed requirements.

KEMET’s SCF-XV coils are common mode chokes with a wide variety of characteristics for automotive and harsh environment industrial application. These toroidal coils are designed with nanocrystalline metal cores and are useful in various noise countermeasure fields.

• Mating surface: silver 
• Mounting tabs: tin 
• Underplating: nickel 
• Operating temperature range: -40°C to +105°C

• 5000V_RMS Input/Output Isolation 
• 400V_P Blocking Voltage 
• 100% Solid State 
• Low Drive Power Requirements
• Arc-Free With No Snubbing Circuits
• No EMI/RFI Generation

This connector series is available in a wide variety of configurations including cable-to-board, board-to-board, and cable-to-cable options in pin counts of up to 50

Texas Instruments’ TMP127-Q1 is a high-accuracy ±0.8°C digital temperature sensor that supports an ambient temperature range of -55°C to 175°C. The device is AEC-Q100 qualified for automotive applications, and comes in a small 2.90 mm x 1.60 mm SOT-23 package. 

The Han® 1 A is a general-use, compact plastic connector used in industrial subsystems and devices. It is a modular system of standard inserts, locking options, and accessories and offers IP20 or IP65 protection depending on configuration.

The PCF2131 is a CMOS Real Time Clock (RTC) and calendar with an integrated Temperature Compensated Crystal (Xtal) Oscillator (TCXO) and a 32.768 kHz quartz crystal optimized for high accuracy and low power consumption. Ideal for metering, medical, aftermarket telematics and white goods applications

TDK μPOL™ DC-DC converters are compact and highly integrated point-of-load converters for powering CPUs, MCUs, ASICs, FPGAs, DSP, and other advanced digital logic devices, providing the high performance, fast load transient response, and high accuracy voltage regulation required by these devices.

Connectivity for a Smart, Connected and Secure world

EV70N78A is a hardware platform to evaluate and develop IoT solutions with the Microchip AVR128DB48 AVR® microcontroller, ATECC608B secure element, and the Sequans Monarch 2 GM02S cellular module. 

3M's 7700 series cable is intended for internal high-speed wiring applications where the crucial design consideration is controlled impedance. At gigabit rates, cables can no longer be considered as simple wires, but rather should be thought of as transmission lines

Ultra-small 0202 Bi-Color LED ideal for backlighting and indicators in wearable, disposable medical and portable devices consumer electronics, and industrial handheld devices 

• 0.65 x 0.65 x 0.2 mm (L x W x H) 
• Low power consumption 

Thick walls, corrosion-resistant stainless steel hardware designed for easy assembly, and IP66 and NEMA 1, 4, 4X, 12, and 13 ratings equip the series for use in a variety of rugged applications.